Idaho Dental Sterilization & Spore Testing Requirements (2026)
Here's what Idaho requires for sterilizer monitoring and record retention — verified against the state's primary source — plus what an inspector checks and a free printable log sheet.
At least weekly
Idaho requires biological (spore) testing of each heat sterilizer at least weekly when scheduled patients are treated.
3 years
Idaho requires sterilization / spore-test records to be retained for at least 3 years.
IDAPA 24.31.01.200 (Rules of the Idaho State Board of Dentistry, Practice Standards / Infection Control)
Informational only — not legal advice. Verify current requirements with your state dental board.
What an inspector checks in Idaho
When a Idahoboard inspector or surveyor reviews a practice's sterilization records, they're confirming the monitoring actually happened and is documented. Expect them to look for:
- A spore-test log showing at least weekly biological monitoring of every heat sterilizer in use.
- Records retained for at least 3 years and available on site.
- Chemical-indicator results recorded for processed loads, plus mechanical (time/temp/pressure) confirmation.
- Documented corrective action for any failed spore test, including retest and instrument recall.
- Compliance consistent with IDAPA 24.31.01.200 (Rules of the Idaho State Board of Dentistry, Practice Standards / Infection Control).
Idaho sterilization FAQ
- How often do dental practices in Idaho need to run a spore (biological) test?
- Idaho requires biological (spore) testing of each heat sterilizer at least weekly when scheduled patients are treated.
- How long must Idaho dental offices keep sterilization and spore-test records?
- Idaho requires sterilization / spore-test records to be retained for at least 3 years.
- What regulation governs dental sterilization monitoring in Idaho?
- In Idaho, sterilization monitoring is governed by IDAPA 24.31.01.200 (Rules of the Idaho State Board of Dentistry, Practice Standards / Infection Control). ClaveLog has verified this against the primary source.
- What should a Idaho practice do if a spore test fails?
- Follow the CDC protocol: immediately take the affected sterilizer out of service, review the load, and re-test. Re-process and recall any implicated instruments as directed, document every step with dates and initials, and only return the sterilizer to service after a passing biological test. Keep this corrective-action record with your Idaho sterilization log — inspectors look for it.
Keep your Idaho sterilization records inspector-ready — automatically.
ClaveLog logs every autoclave load from a phone in seconds, tracks spore tests from any lab, and prints a board-ready packet in one click. Stop printing sheets — keep it digital.